New and used food processing, packaging & materials handling machiney
      +61 3 9791 7011

GRACO Air Operated Sanitary Pump

Monark® 5:1 207-550 Air Operated Sanitary Pump Sanitary pump for drum unloading of light to moderate viscosity fluid ■ Flow to 4.0 gpm (15.1 lpm) ■ Maximum fluid pressure of 500 psi (3.5 MPa, 35 bar) ■ Adjust-A-Stroke® option available for ±2% accurate metering ■ Monark air motor with 10 year warranty Graco’s Monark 5:1 Double Ball Pump is suitable for fl...

IOPAK 2" (51mm) Sanitary Self-Priming Pump (CIP)

This good used IOPAK 2" (51mm) self priming positive displacement pump is made of AISI316.Self-priming pumps create and maintain a sufficient vacuum level to draw fluid with no external assistance. As a positive displacement pump, it is able to handle product mixed with air as well as product with a liquid level below the pump. This pump is useful in the milking room as it can suction milk str...

WILDEN Air Operated Double Diaphragm Pump (1/2")

Wilden P1 - 13 mm (1/2") Plastic Pump Flow rate to 56.1 LPM (14.8 GPM) (taken from internet - not tested for capacity by PPN) Max Pressure = 8.6 BAR (125 PS NON-WETTED HOUSINGS Description Material Center Section Polypropylene or Acetal Air Valve Polypropylene or Acetal MAXIMUM SUCTION LIFT CAPABILITY 6.1 m (20') MAXIMUM DIAMETER SOLIDS 1.6 mm (1/16") ...

WILDEN Diaphragm Food Pump

The Wilden diaphragm pump is an air-operated, positive displacement, self-priming pump. This WILDEN Diaphragm M15 Pump was designed for, and used, in the Food Industry. Water discharge flow rates: 75.7L/min - 908L/min (Rubber/TPE Fitted) 75.7L/min - 795L/min (Teflon Fitted) Maximum pump operating pressure should not exceed 125 psig (8.62 Bar) Maximum Diameter of solids: 9.52mm Suction ...

GRACO Drum / Bin Unloader (Bin Evacuation System)

This unit was modified to suit CEVA bins (Plastic Folding Bulk Storage Bins). Maximum working fluid pressure: 430 psi (3 MPa, 30bar) Compressed air requirement: 80-100 psi (0.55-0.7MPa, 5.5-7bar) Max input air: 100 psi (0.7 MPa, 7bar) Air inlet - air controls: 3/4 in. npt(f) Air inlet - pump: 1 in. npt(f) Fluid displacement: 0.23 gal./cycle (each pump) Flow rate: 27.6 gpm ...

EBARA Dry Vacuum Pump

The UERR series dry pumps are based on the durable Roots design principal that offer quiet operation, low vibration and low cost of pump rebuilds. This unit is capable of pulling vacuum to 0.04 Tor Broad product line offers an ideal basic pump configuration for each process and a wide range of pumping speeds. This unit is assembled using two multi stage pumps mounted on a common mild steel frame...

EBARA Dry Vacuum Pump

The UERR series dry pumps are based on the durable Roots design principal that offer quiet operation, low vibration and low cost of pump rebuilds. This unit is capable of pulling vacuum to 0.04 Tor Motor size: 2.2kW Inlet and Outlet: 1½" Broad product line offers an ideal basic pump configuration for each process and a wide range of pumping speeds. This unit is assembled using a multi stage...

WAUKESHA CHERRY BURRELL Heavy-Duty Sanitary Centrifugal Pump

This pump is a sanitary arrangement featuring a quick release clamp to separate the body from the impeller facilitating easy and effective cleaning. Inlet 70mm. Outlet 50mm. Direct coupled to a 22kW motor, 2840RPM, 415V AC, 3 Phase, TEFC Electric Motor. Designed for heavy-duty, high-efficiency applications. Provides exceptional corrosion resistance. Impeller and shaft are one piece, which con...

ALLWEILER Helical Rotor (Progressing Cavity) Pump 70mm (2.75")

Good used ALLWEILER Helical Rotor (Progressing Cavity) Pump 70mm (2.75") used in the food industry. Performance Data ASBP Capacity (Q) : Up to 42L/min (product dependent) Discharge Pressure(PD): Up to 12 Bar Differential Pressure (PDIFF) Up to 12 Bar Viscosity (V) up to 2000mm²/s Fluid temperature (T) Up to 100 ° Construction features Block design (Motor attac...

MOYNO Helical Rotor Pump (Progressive cavity)

This MOYNO Helical Rotor sanitary stainless steel pump was used in the bakery industry. Features: - Minimal product degradation in shear-sensitive applications - Long service life in abrasive slurries and corrosive fluids - Temperatures to 350° F, viscosities to 1,000,000 cps - Handle suspended solids to 1.1" diameter - Pressures to 225 psi; capacities from .02 to 345 gpm (Product de...

SOAVI NIRO High Pressure Pump

This high pressure pump would be suitable for feeding spray atomisers or similar applications requiring high pressure. This particular unit is 3 Cylinder, combines a 0-60 Bar pressure gauge and a relief valve on the outlet manifold, and features stainless casework....

VIKING Hydraulic Gear Pump

Nominal Capacity: At 1450 rpm, expected flow would be approx 16 LPM which would change depending (taken from internet - not tested for capacity by PPN) on pressure and viscosity. It is fitted with a sanitary Viton mechanical seal, limited to Max Temp of 176 Deg.C SEE ATTACHED PUMP CURVES AND DETAILS ...

HEISHIN NEMO (MOHNO) In line blender -Helical Rotor Pump (jacketed)

The design for eliminating edges, corners, concave parts to enhance washing efficiency.The limit number of liquid contact parts enables easy disassembling and reassembling.Capacity Discharge:Up to 177 L/min Pressure:Up to 1.2 MPa Product Uses: Condensed milk, Liquid egg, honey, jelly, jam, cosmetic milky lotion, shampoo, perfume material, etc. Features Easy disassembling/assembling. Minimu...

STERLING SIHI Liquid Ring Compression Pump

This STERLING SIHI Liquid Ring Compression Pump was used in a confectionery plant. Motor: 5.5kW, 4 POLE, 3 phase Inlet Outlet Dimensions: 50mm ID...

CREPACO Lobe Pump with Motor, Hopper and Control Box

This CREPACO R2R skid mounted, variable speed lobe pump is fitted with a jacketed (not steam) feed hopper. The unit can also be used for recirculating a product. Feed Hopper: 490mm (top ID) x 650mm D Hitachi Motor: 0.4kW Comes complete with a control panel Mobile - skid mounted...

CREPACO Lobe Pump with Motor, Hopper and Control Box

This CREPACO R2R variable speed lobe pump is fitted with a jacketed (not steam) feed hopper. The unit can also be used for recirculating a product. Feed Hopper: 490mm (top ID) x 650mm D Hitachi Motor: 0.4kW Controlled by Foot Switch Pipes: one and a quarter inches. ...

BRAN LUEBBE Metering Pump

Year of manufacture 2005 Drive: 0.55Kw Geared Motor....

VAN WIJK & BOERMA Progressing Cavity Pump (45mm)

This 50mm inlet Helical Rotor sanitary stainless steel pump was used in the food industry.Outlet reduced to 20mm. Fitted with 2 butterfly valves plus a pressure guage Features: - Minimal product degradation in shear-sensitive applications - Long service life in abrasive slurries and corrosive fluids ...

NETZSCH Progressing Cavity Pump (Dosing)

This s/s NETZSCH NEMO NM Series Pumps are designed specifically for difficult pumping situations.THIS IS A MINI DOSING SERIES fitted with an ALFA LAVAL Actuator LENZE Motor: 0.37kW Motor 1410L/min @ 50 Hz 0.45kW Motor 1710L/min @ 60Hz 0.66kW Motor 2520L/min @ 87Hz You can be assured of the following: • Low shear rate • Non-pulsating metered flow • Volume practically unaffected by ...

NETZSCH Progressing Cavity Pump (Dosing)

This s/s NETZSCH NEMO NM Series Pumps are designed specifically for difficult pumping situations.THIS IS A MINI DOSING SERIES fitted with an ALFA LAVAL Actuator LENZE Motor: 0.37kW Motor 1410L/min @ 50 Hz 0.45kW Motor 1710L/min @ 60Hz 0.66kW Motor 2520L/min @ 87Hz You can be assured of the following: • Low shear rate • Non-pulsating metered flow • Volume practically unaffected by ...

HOWARD Rotary Lobe Pump

This rotary lobe pump was used in a food factory. Temperature: 110 Degrees Max BAR: 20 YOM: 2000 Fitted with a BEIER variable speed geabox Input 1500rpm. Speed: 0.20 - 0.80 Mobile - mounted on a s/s trolley with handle...

OMEC Rotary Lobe Pump (Trilobe)

This rotary Tri-lobe pump was used in a food factory. Capacity: 0 - 1000L min, dependent on viscosity, speed and pressure Inlet and outlet: 50mm Geared Motor: 3.75kW, 415V, See Full specs attached (pdf) ...

PROCON Rotary Vane Pump with spare head

This s/s PROCON Series 6 Rotary Vane Pump comes complete with a spare s/s pump head. It was used in a pharmaceutical plant. Standard Specifications: Body stainless steel Capacity - 300 to 660 gph (taken from internet - not tested for capacity by PPN) Nominal speed - 1,725 rpm Max. discharge pressure - 250 psi Rotation clockwise Dry weight approx. 13 lbs Motor Size: 1.5kW,415v,1440r...

JAPANESE S/S Positive Displacement Pump

This simple pump features a 172mm dia x 30mm deep pumping chamber with a quick removable outer face to facilitate ease of cleaning. All wetted parts are stainless steel and the unit is mounted on a Mild and Stainless steel base supported on castors....

GRACO Submersible pump with feed hopper, agitator & s/s tank,

This complete skid mounted pump system was used in a food plant on a very viscous, type of product similar to bean paste or jam. It consists of the GRACO pump, hopper with auger type agitator, self heated tank. ALL CONTACT PARTS ARE STAINLESS STEEL. The jacketed hopper is fitted with a NISSEI 0.20kW motor with a ratio of 1:60 which drives an auger. The auger has a very large single flight which g...

SARGENT WELCH Vacuum Pump

Sargent Welch 88212-04 Direct-Torr Vacuum Pump, Two Stage Rotary Vane Oil Sealed Direct Drive. 10 millitorr blankoff pressure. 115V, 60 Hz with chord. ...

RIETSCHLE Vacuum Pump (Liquid Ring )

L Series Compact Liquid Ring Pumps for Heavy Duty Extreme conditions, which prevail in humid and wet processes, lead to lime scale or abrasion, and hence to a considerable reduction in the performance of the pump. Elmo Rietschle liquid ring pumps, however, meet these challenges Advantages at a glance •Constant operating characteristics by ceramic coating •Maximum abrasion resistance •...