New and used food processing, packaging & materials handling machiney
      +61 3 9791 7011

SEIKENSHA Continuous Cooker/Extractor

This system mixes and cooks by utilising a stainless steel screw driving through a steam jacketed S/S barrel. Solids enter the system via an overhead mounted feed hopper via an adjustable feed rate "gate" valve. A facility exists for a liquid addition to the screw barrel, immediately following the solids entry point. The liquid feed is via an on board S/S 1/2" pump and 1/2" thick wall tubing....

IOPAK Cream Chiller

Capacity 1,000L/Hr Tank Capacity: 300L Product Contact: SUS316 (SUS304 for Non-Contact) Cream Inlet Temperature 36 C Flow Temperature 36C- 4 C It is equipped with 1.5" Rotary Lobe Pump (1,000L/hr) - This cream cooler will be supplied to Australian Standards. It will be skid mounted....

STOKES SYNERTEC Heat Exchanger (Electric)

This is a a Flanged Element - type heat exchanger and was used to heat liquids Watts: 6000 Voltage: 240/415 Phase: 3 Code: M426...

HOTCO In- Line Heat Exchanger (Electric)

This system is designed to heat pure water that flows through the unit, from 0 degrees C up to 130 degrees C (under pressure) The unit comprises a free standing in- line electric heat exchanger and an electrical control panel :- Fluid: Pure Water Temperature: 100 degrees C Power Rating: 200Kw, plus 10%, 415V, 50Hz Minimum Rating: 66kW DELTA, (3 x 66kW Zones) Heating System: Eighteen (18)...

JOHNSON VOTATOR Laboratory Scraped Surface Heat Exchanger

This laboratory/pilot scale scraped surface heat exchanger, or continuous cooker, was used in the confectionery industry....

PAVAN Shell and Tube Heat Exchanger fitted with centrifugal pump

This shell and tube heat exchanger was used in a pasta plant.It comes fitted with its own centrifugal pump. No name on pump Motor size of pump: 2.2kW 2855 rpm Grade of s/s: 304 /304L Tube Length: 1500mm 6 Tubes within. OD of Shell tube: 300mm Stamp on Pump Inlet Flange WA 052268 BE 967 Stamp on flange leading to HE from Pump 65DN -10 16 Tube1092 F 304/304L Stamp on outlet flange of ...

Australian Made Stainless Steel Heat Exchanger

This unit consists of 10 spiral formed 25mm dia stainless steel tubes of 3,000mm length set in a flat rack configuration. Centre distance between the tubes is 85mm and the entry and exit ports are 1.5" female dairy. The unit would be suitable for ambient air interchange or as liquid submersed type heat exchanger....

STERIFLO UV Water Disinfection System

This STERIFLO unit was used in a large dairy plant for water treatment. Model CX2 Serial Number: 744 Electrics: 170watts Inlet/Outlet Size: 50mm Treatment Chamber Dimensions: 150mm ID X 980mm L Electrics:220/240 Lamp Current: 800mA No of lamps -2 (not included) Fitted with The Davey Steriflo UV water disinfection system is an effective and economical means of eliminating harmful bac...

JOHNSON Votator - Swept Surface Heat Exchanger

Footprint - Width 560mm : Depth 730mm Height - 1400mm Unit is mounted on castors to facilitate portability. Product outlet - 1.5" dia Product inlet - 1.25" dia Refrigerant outlet - 1.25" dia Refrigerant inlet - 1.5" dia....